Basic Info
Model No.: YZPST-MOR-2WSS-3K3-J
Brand: YZPST
Additional Info
Productivity: 10000
Transportation: Ocean,Air
Place of Origin: CHINA
Supply Ability: 100000
Certificate: ISO9001-2008,ROHS
HS Code: 8533100000
Port: SHANGHAI
Payment Type: L/C,T/T,Paypal
Incoterm: FOB,CFR,CIF
Product Description
YZPST-MOR-2WSS-3K3-J
The resistors arrayed are placed into a constant temp. humidity oven at the temp. of 40 ±2°c and the humidity of 90~95%, then rated power is applied for 1.5 hours and cut off for 0.5 hour. The similar cycle will be repeated for 500+24 -0 hours in total (including cut-off time). Then remove the voltage, taking the resistors out of the oven and leaving them at room temp. for one hour. The resistance value change rate between pre-and- post test shall be within ±5%. There also shall be no evidence of remarkable change on appearance, and the marking shall not be illegible.
|
TYPE |
L 4 |
D t |
H:t:3 | d:t0.1 |
ResistanceRange |
MaxWorking |
|
RSU | ||||||
|
1W |
6.8 | 2.6:t0.5 |
28 |
0.6 |
0.220-1MO |
350V |
|
2W |
9 |
3.5 |
28 |
0.8 |
220-1MO |
500V |
|
3W |
15 |
5 |
28 |
0.8 |
O.220-1MO |
750V |
| Steps | Temperature(k) | Time (minutes) |
| 1st step | -55 ± 3 | 30 |
| 2nd step | Room temp. | 3 |
| 3rd step | 155 ± 3 | 30 |
| 4th step | Room temp. | 3 |
7.6 Moisture-proofLoad Life:
The resistors arrayed are placed into a constant temp./humidity oven at the temp. of 40 ±2°c and the humidity of 90~95%, then rated power is applied for 1.5 hours and cut off for 0.5 hour. The similar cycle will be repeated for 500+24 -0 hours in total (including cut-off time). Then remove the voltage, taking the resistors out of the oven and leaving them at room temp. for one hour. The resistance value change ratebetween pre-and- post test shall be within ±5%. There also shall be no evidence of remarkablechange on appearance, and the markingshall not be illegible.
7.7 Solder-ability:
The leads with flux are dipped in a melted solder of 235 ±5°c for 2 seconds,more than 95% of the circumference of the lead wires shall be covered with solder.
7.8 Resistance to Soldering Heat:
Two leads are together dipped in a melted solder of 270 ±5°c for 10 ±1seconds, or 350 ±10°c for 3.5 ±0.5 seconds, Then remove the resistorsand leaving them at room temp. for one hour. The resistance value change rate between pre-and-post test shall be within ±1%.
7.9 Nonflammability:
The resistors are applied the power of 16 times the rated wattage for 5 min. and
shallnot get flame.
Product Categories : Electronic Components Resistor > Metal film resistors
Hot Products
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now
