Communicate with Supplier? Supplier
John chang Mr. John chang
What can I do for you?
Chat Now Contact Supplier
YANGZHOU POSITIONING TECH CO., LTD.
YANGZHOU POSITIONING TECH CO., LTD.
YANGZHOU POSITIONING TECH CO., LTD.
YANGZHOU POSITIONING TECH CO., LTD.
Home> Blog> Radiator thermal resistance, thyristor dissipated power test method

Radiator thermal resistance, thyristor dissipated power test method

December 07, 2020

A special sealing device is made by the method of disposing the dust in the radiator. This kind of device only leaves the fan through hole. Go to the construction site and construction site to collect a large amount of floating ash, place the collected floating ash and fan in a special closed device, turn on the fan to let the floating ash fill the entire special closed device, and from time to time use a diffuser to distribute the fog outside the special device Water, pay attention to control the proper humidity in the special sealing device. After waiting for about a month, check the accumulation of dust on the thyristor radiator assembly in the special sealing device, so that the thyristor assembly and radiator fins have accumulated a thick layer of lime soil, and then install it back to the thyristor rectifier for subsequent tests. The dust accumulation of the thyristor assembly is related to the amount of dust in the special sealing device, the humidity control, and the time the fan is turned on. If the dust accumulation is not enough, the time to open the sealing device can be extended to increase the dust in the special sealing device.

Radiator thermal resistance, thyristor dissipated power test method Excitation regulator is set to manual open-loop control (fixed control angle operation mode), through the thyristor high current test, after the temperature of the thyristor element is stabilized, measure the temperature of the thyristor shell and the wind speed below the thyristor radiator The temperature at the entrance, calculate the power dissipation of the thyristor, and calculate the thermal resistance of the thyristor radiator. Schematic diagram of the thyristor high current test. The submodule AVR represents the excitation regulator, the submodule FLZ represents the thyristor rectifier, the submodule TYQ represents the voltage regulator, the submodule BYQ represents the isolation transformer, and the submodule L1 is a large inductance component (simulated power generation) Machine rotor), factory power AC380V to the sub-module thyristor through the switch QS1, power generation control technology and equipment. Analysis of the effect of dust accumulation in the excitation system on the heat dissipation of the thyristor rectifier device. The rectifier device FLZ provides power supply. The factory power AC380V provides a synchronization signal to the excitation regulator AVR via the voltage regulator TYQ. U closes the load switch QS2, and the thyristor turns on the load. Large inductance L1 , A trigger pulse signal is provided through the excitation regulator AVR to control the thyristor rectifier to output a large current.

Contact Us

Author:

Mr. John chang

E-mail:

info@yzpst.com

Phone/WhatsApp:

8613805278321

Popular Products
You may also like
Related Information
Thyristor

The full name thyratron, commonly known as thyristor, is a bistable power electronic device that contains 3 or more PN junctions that can switch from off-state to on-state or from on-state to...

Judgment of thyristor damage causes

When the thyristor damage need to check the analysis of the reasons, the core can be removed from the cooling jacket, open the core box and then remove the chip, observe the signs of damage to...

A test method for measuring capacitance, inductance, resistance, voltage, diode, and triode using a multimeter

1. Multimeter structure (500 type) The multimeter consists of three main parts: the meter head, the measuring circuit and the changeover switch. (1) Header: It is a high-sensitivity magneto-electric...

Talking about the method of thyristor overcurrent protection

In order to prevent damage to the thyristor caused by the failure of the AC circuit inversion of the thyristor, the traditional method is to use a fast fuse for overcurrent protection. The advantage...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Contact Us

Author:

Mr. John chang

E-mail:

info@yzpst.com

Phone/WhatsApp:

8613805278321

Popular Products
Blog News
Thyristor

August 14, 2023

Home

Product

Whatsapp

About Us

Inquiry

苏ICP备05018286号-1
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send