How to use thyristor inrush current tester method

DBC-101 Thyristor Inrush Current Tester Introduction The DBC-101 Thyristor Inrush Current Tester is based on the relevant provisions of JB/T7624-94 "Rectifier Diode test method" and JB/T7626-94 "Reverse Blocking Tube Test Method". And design. The circuit design of this equipment is concise and concise. It adopts single-chip microcomputer control to complete automatic charging of capacitors and automatic voltage regulation. The peak value of the inrush current is automatically detected and displayed by a digital meter. The function of testing peak voltage, peak leakage current and testing voltage drop under inrush current can be increased according to user's needs. The equipment has advanced technology, performance by small size, light weight, simple operation, test repeatability, and easy maintenance and debugging features, is a necessary test equipment for Power Semiconductor Device manufacturers and application units.

DBC-101 Thyristor Inrush Current Tester Main technical indicators:

1. Inrush current test range: 100-2000A continuously adjustable 2. Surge current waveform: Approximate sine half-wave with bottom width of 8.3mS or 10mS 3. Surge current test frequency: single-wave, continuous surge can be set The number of times 0-100, the interval time is 5-100 seconds.

4. The whole power supply: AC220V, 50Hz, the average power is less than 500VA

5. Overall appearance: 500×500×220mm

DBC-101 Thyristor Inrush Current Tester Optional Features:

1. Peak voltage test range: 0-3000V

2. Peak leakage current measurement range: 0-100mA

3. Surge drop test range: 0-4.5V

Thyristor Inrush Current Tester Model: DBC-101